Caple CM120 - Operating Your Microwave; Setting the Clock; Microwave Cooking Mode

21
Please keep this instruction manual for future reference
Instruction manual CM120
OPERATION INSTRUCTIONS
SETTING THE CLOCK:
When the microwave oven is switched on, the LED will display “0:00”, the buzzer will ring once.
» Press “Kitchen Timer/Clock” twice to select clock function, the hour figures will flash.
» Turn “ “ to adjust the hour figures, the input item should be within 0-24hr.
» Press “Kitchen Timer/Clock” the minute figures will flash.
» Turn “ ” to adjust the minute figures, the input time should be within 0-59.
» Press “Kitchen Timer/Clock” to finish setting the clock. “:” will flash, and the time
will illuminate.
NOTE:
If the clock is not set, the oven will not function when powered.
During the process of setting the clock, if you press “Stop/Clear” the oven will go back to the
previous status automatically.
MICROWAVE COOKING:
Press “Micro/Grill/Combi” the LED will display “P100”.Press “Micro/Grill/Combi” a few times
or turn “ “ to choose the power you want, and “P100”, “P80” “P50”, “P30” or “P10” will
display for each added press. Then press ”Start/+30Sec/Confirm” to confirm, and turn “ “ to
set the cooking time from 0:05 to 95:00. Press ”Start/+30Sec/Confirm” again to start cooking.
Example:
If you want to use 80% microwave power to cook for 20 minutes, you can operate the oven as the
following steps.
» Press “Micro/Grill/Combi” once, the screen display “P100”.
» Press “Micro/Grill/Combi” once again or turn” “ to choose 80% microwave power.
» Press “Micro/Grill/Combi” to confirm, and the screen displays “P80”.
» Turn “ “ to adjust the cooking time until the oven displays “20:00”.
» Press “Start/+30Sec/Confirm” to start cooking.
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14