17Instruction manual RBF6Please keep this instruction manual for future reference
OPERATING YOUR FREEZER
THERMOSTAT SETTING
The freezer thermostat automatically regulates the inside temperature of the
compartments. By rotating the knob from position 1 to 5, colder temperatures
can be obtained. “•” position shows thermostat is closed and no cooling will
be available.
IMPORTANT NOTE:
Do not try to rotate knob beyond 1 position it will stop your appliance.
For short-term storage of food in the freezer, you can set the knob between minimum and
medium position (1-3).
For long-term storage of food in the freezer, you can set knob medium position (3-4).
For freezing fresh food, set the knob to the high position (5). Once the food is fully frozen, reset
the thermostat to its original position.
Note that; the ambient temperature, temperature of the freshly stored food and how
often the door is opened, affects the temperature in the freezer. If required, change the
temperature setting.
Whenyourstswitchontheappliance,youshouldideallytrytorunitwithoutanyfoodin
for 24 hours and not open the door. If you need to use it straight away, try not to put much
food inside.
If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting in
order not to damage the compressor.
Your freezer is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not recommend
operating your freezer out of stated temperatures value limits in terms of cooling effectiveness.
CLIMATE CLASS AMBIENT TEMPERATURE
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)
This appliance is designed for use at an ambient temperature within the 16 °C - 32 °C range.
To Next Page
Loading...
