Caple RIF1801 - Page 13

13Instruction manual RiF1801Please keep this instruction manual for future reference
ELECTRICAL CONNECTION
For your safety please read the following information
- The appliance is heavy and could cause injury, it must
be transported by two people.
DISPOSAL OF OLD APPLIANCE:
- Old fridges and freezers contain isolation material and
refrigerant with CFC. Therefore, take care not to harm
environment when you are discarding your old fridges.
- If your old fridge or freezer has a lock, break or remove
the lock before discarding it, because children may get
trapped inside it and may cause an accident.
- Be careful to avoid damaging the pipework before
disposal, e.g. by puncturing coolant channels, bending
pipework, scratching the surface coating.
Warning; Risk of re / ammable materials
WARNING:
This appliance must be earthed.
This appliance operates from 220-240 volts and should be protected by a 13 amp fuse
in the plug.
- The appliance is heavy and could cause injury, it must
be transported by two people.
DISPOSAL OF OLD APPLIANCE:
- Old fridges and freezers contain isolation material and
refrigerant with CFC. Therefore, take care not to harm
environment when you are discarding your old fridges.
- If your old fridge or freezer has a lock, break or remove
the lock before discarding it, because children may get
trapped inside it and may cause an accident.
- Be careful to avoid damaging the pipework before
disposal, e.g. by puncturing coolant channels, bending
pipework, scratching the surface coating.
Warning; Risk of re / ammable materials
- The appliance is heavy and could cause injury, it must
be transported by two people.
DISPOSAL OF OLD APPLIANCE:
- Old fridges and freezers contain isolation material and
refrigerant with CFC. Therefore, take care not to harm
environment when you are discarding your old fridges.
- If your old fridge or freezer has a lock, break or remove
the lock before discarding it, because children may get
trapped inside it and may cause an accident.
- Be careful to avoid damaging the pipework before
disposal, e.g. by puncturing coolant channels, bending
pipework, scratching the surface coating.
Warning; Risk of re / ammable materials
IMPORTANT:
Do not use th pliance without the fuse cover in position.
Theapplianceissuppliedwithastandard13amp3-pinmainsplugttedwitha13-ampfuse.
Should the fuse require replacement, it must be replaced with a fuse rated at 13 amp and
approved to BS1362.
ThemainsleadofthisappliancehasbeenttedwithaBS1363A13Afusedplug.Tochangea
fuse in this type of plug, follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3. Replace fuse cover.
Warning; Risk of re / ammable materials
Warning; Risk of re / ammable materials
The mains lead of this appliance has been fitted with a BS 1363A 13A fused plug.
To change a fuse in this type of plug, follow the steps below:
1.Remove the fuse cover and fuse.
2.Fit replacement 13A fuse, ASTA approved to BS
1362 type, into the fuse cover.
3.Replace fuse cover.