Caple RIF1801 - Page 16

16 Instruction manual RiF1801 Please keep this instruction manual for future reference
USING THE APPLIANCE
› Before using your appliance, wipe all parts with a
solution of warm water and a teaspoon of sodium
bicarbonate. Then, rinse with clean water and dry.
Return all parts to the appliance after cleaning.
› Remove all transport tapes and foam protection pieces.
Clean the interior with a cloth dampened in lukewarm
soap and water. Rinse with clean water and dry.
› The adjustable front legs should be stabilized at an
appropriate height to allow your freezer to operate in
a stable and proper way. You can adjust the legs by
turning them clockwise (or in the opposite direction).
This should be done before placing food in the freezer.
› Install the distance adjustment plastic (the part with black vanes at the rear) by turning it
90°asshownintheguretopreventthecondenserfromtouchingthewall.
› Yourappliancemayhaveanodourwhenitisoperatedforthersttime.Thisisnormaland
the odour will fade when your freezer starts to cool.
WARNING:
Connect to the electrical socket but do not switch the power to the appliance on for at least 12
hours. The coolant within the product needs time to settle after it has been transported and put
into position, failure to do this will affect the cooling performance of your appliance.