32 Instruction manual RiF1801 Please keep this instruction manual for future reference
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
Reviewing the information below may save you from calling for service.
ERRORS
Your freezer will warn you if the temperature is at an improper level or if a problem occurs with
the appliance.
If your freezer is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
ERROR
TYPE
MEANING WHY WHAT TO DO
E01-E07
Sensor
warning
Call Caple service for assistance as soon as
possible.
E08
Low Voltage
Warning
Power supply to the device has
dropped to below 170V
This is not a failure.
This prevents damage to the compressor.
The voltage needs to be increased back
to required levels.
This warning will turn off after the voltage gets
to the required level.
If this warning continues contact Caple service.
E09
Freezer
compartment
is not cold
enough
Likely to occur after long term
power failure.
1. Set the freezer temperature to a colder value
or set Super Freeze. This should remove the
error code once the required temperature has
been reached. Keep doors closed to improve
time taken to reach the correct temperature.
2. Remove any products which have thawed/
defrosted during this error. They can be used
within a short period of time.
3. Do not add any fresh produce to the freezer
compartment until the correct temperature has
been reached and the error is no longer.
If this warning continues contact Caple service.
To Next Page
Loading...
