40 Instruction manual WDi3301 Please keep this instruction manual for future reference
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each cycle to remove lint and
stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the seal
after each wash.
CLEANING THE INLET FILTER
If there is insufficient or no water when the tap is
opened, the inlet filter must be cleaned as follows:
1) Clean the filter in the tap:
› Close the tap
› Remove the water supply hose from the tap
› Clean the filter
› Reconnect the water supply hose
2) Clean the filter in the washer dryer:
› Unscrew the inlet pipe from the back of the machine
› Pull out the filter
› Use a brush to clean the filter
› Reinstall the filter
› Reconnect the inlet pipe
CLEANING THE INLET FILTER
If there is insufficient or no water when the tap is opened, the inlet filter must be cleaned
as follows:
1) Clean the filter in the tap:
› Close the tap
› Remove the water supply hose from the tap
› Clean the filter
› Reconnect the water supply hose
2) Clean the filter in the washer dryer:
› Unscrew the inlet pipe from the back of the
machine
› Pull out the filter
› Use a brush to clean the filter
› Reinstall the filter
› Reconnect the inlet pipe
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each cycle to remove lint
and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
CLEANING THE INLET FILTER
If there is insufficient or no water when the tap is opened, the inlet filter must be cleaned
as follows:
1) Clean the filter in the tap:
› Close the tap
› Remove the water supply hose from the tap
› Clean the filter
› Reconnect the water supply hose
2) Clean the filter in the washer dryer:
› Unscrew the inlet pipe from the back of the
machine
› Pull out the filter
› Use a brush to clean the filter
› Reinstall the filter
› Reconnect the inlet pipe
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each cycle to remove lint
and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
CLEANING THE INLET FILTER
If there is insufficient or no water when the tap is opened, the inlet filter must be cleaned
as follows:
1) Clean the filter in the tap:
› Close the tap
› Remove the water supply hose from the tap
› Clean the filter
› Reconnect the water supply hose
2) Clean the filter in the washer dryer:
› Unscrew the inlet pipe from the back of the
machine
› Pull out the filter
› Use a brush to clean the filter
› Reinstall the filter
› Reconnect the inlet pipe
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each cycle to remove lint
and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
CLEANING THE INLET FILTER
If there is insufficient or no water when the tap is opened, the inlet filter must be cleaned
as follows:
1) Clean the filter in the tap:
› Close the tap
› Remove the water supply hose from the tap
› Clean the filter
› Reconnect the water supply hose
2) Clean the filter in the washer dryer:
› Unscrew the inlet pipe from the back of the
machine
› Pull out the filter
› Use a brush to clean the filter
› Reinstall the filter
› Reconnect the inlet pipe
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each cycle to remove lint
and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
To Next Page
Loading...
