15Instruction manual WDi3301Please keep this instruction manual for future reference
INSTALLATION
UNPACKING THE WASHER DRYER
Unpack your washer dryer and check if there is any damage during the transportation. Also make
sure that all the items (as shown on page 14) in the attached bag are received. If there is any
damage to the washer dryer during the transportation, or any item is missing, please contact
your retailer immediately.
DISPOSE OF THE PACKING MATERIALS
WARNING:
Keep packaging materials away from children.
The packing materials of this machine may be dangerous to children. Please dispose of them
properly. Please dispose of the related packing materials according to the relevant local
regulations. Please do no throw the packing materials away together with the other daily
living disposals.
REMOVE TRANSPORT BOLTS
WARNING:
› You must remove the transport bolts from the backside
before using the product.
› You’ll need the transport bolts again if you move the
product, so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove along with the flat washers, rubber bungs and
plastic spacer tubes.
2. Cover the open transportation bolt holes with the plastic cap included in the instruction bag.
3. Keep the transport bolts, flat washers, rubber bungs and plastic spacer tubes stored away
safely for future use.
NOTE:
During the removal of the bolts, spacer tubes fall inside the product. These can be removed by
tilting the product forward and recovering them from the floor or inside the base of the machine.
To Next Page
Loading...
