EasyManua.ls Logo

Caple WDI3301 - Page 7

Caple WDI3301
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7Instruction manual WDi3301Please keep this instruction manual for future reference
VENTILATION WARNINGS
- Install the rear of the appliance close to a wall or
vertical surface.
- There should be a gap of at least 12mm between the
machine and any obstructions. The inlet and outlet air
should be kept clear of obstruction.
- DO NOT block the air inlets at the front and back of
your washer dryer.
- DO NOT block the air inlets at the base and side of
your washer dryer.
- Make sure carpets or rugs do not obstruct the base or
any ventilation openings.
- Prevent items from falling or collecting behind the
washer dryer as they may obstruct the air inlet and
outlet.
- Adequate ventilation must be provided to avoid back
flow of gases into the room from appliances burning
other fuels, including open fires.
- Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances burning gas
or other fuel.
- The rear of the washer dryer gets quite hot during use.
- Position the appliance so that the back is not
accessible while in operation, but ensure that the sides
have a space available to allow airflow.

Related product manuals