EasyManua.ls Logo

Caple WI3117 - Operating You Wine Cabinet and Setting the Temperature

Caple WI3117
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating your wine cabinet and setting the temperature
Please use the cabinet within ambient
temperatures between 5-32 ºC, if the ambient
temperature is higher or lower than this, it will cause the temperature to fluctuate in the
cabinet, possibly preventing it from reaching 5-18 ºC.
Control panel
“Run”
Indicator light illuminates to signify the
cooling mode is currently in operation.
Light ”B
utton
Used to swit
ch the internal light on/of
f.
Power” Bu
tton
To swit
ch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
“Up” Button
Used to r
aise (warm) the temperature in 1 ºC increments.
“D
own” Button
Used to low
er (cool) the temperature by in 1 ºC increments.
Setting the temperature
To set the temperature, connect th
e power cord to a properly grounded outlet. In the
event of a
power interruption, the previous temperature setti
ng is automatically erased and it will de
fault to a
preset temp
erature setti
ng of 12°C
Set th
e desired cooling temperature by pressing the buttons adjacent to the “UP/DO
WN"
indicators. Each depressi
on of the buttons will scroll through the available temperature settings in
increments of
1°C.
The t
emperature setting can be adjusted from 5°
C -18°C
To vie
w the actual temperature at anytime press and hold the temperature adjustment button (up
or down) for approximately 5 seconds, the actual temperature will temporarily flash in the LED
display for 5 Seconds. After this it will revert back to display the set temperature.
Flashing LED = Cabinet temp
erature
Ste
ady LED = Set temperature
Note
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet
will not start.
When you u
se the wine cabinet for the first time or you restart the cabinet after having
been shut
off for a long time, th
ere could be a few degrees variance between the
temperature you select
and the on
e indicated on the LED readout. This is normal
and it is due to the length of the
activation time.
Once the wine cabinet has been running for a few hours
everything will be back
t
o normal. 5

Other manuals for Caple WI3117

Related product manuals