Fixing the top bracket!
!
Using the foot sliders
If you want to adjust the height over 820mm, please install the product using the foot sliders
provided. These are provided to help prevent the feet catching on the floor when sliding the appliance
into the aperture. Place the back foot in the location marked ‘Back’ below and the front foot in the
location marked ‘Front’. Once fitted to both sides of the wine cabinet the appliance can be gently
positioned into the aperture, taking care not to place excess pressure on the feet when locating the
cabinet.
!
9
After installing the wine cabinet, please
open the door, adjust the fixing bracket
(a) and fix this in position with three
screws (c) using a screwdriver (d) into the
work surface/kitchen cabinet.
a) Top fixing bracket
b) Kitchen Cabinet
c) Screw
d) Screwdriver
This bracket will keep the product secure
and help prevent it moving when in use
To Next Page
Loading...
