11Instruction manual WMi3001 & WMi3006Please keep this instruction manual for future reference
INSTALLATION
UNPACKING THE WASHER MACHINE
Unpack your washing machine and check if there is any damage during the transportation. Also
make sure that all the items (as shown on page 10) in the attached bag are received. If there is
any damage to the washing machine during the transportation, or any item is missing, please
contact your retailer immediately.
DISPOSE OF THE PACKING MATERIALS
WARNING
Keep packaging materials away from children.
The packing materials of this machine may be dangerous to children. Please dispose of them
properly. Please dispose of the related packing materials according to the relevant local
regulations. Please do no throw the packing materials away together with the other daily
living disposals.
REMOVE TRANSPORT BOLTS
WARNING
› You must remove the transport bolts from the backside
before using the product.
› You’ll need the transport bolts again if you move the
product, so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove along with the flat washers, rubber bungs
and plastic spacer tubes.
2. Cover the open transportation bolt holes with the plastic cap included in the instruction bag.
3. Keep the transport bolts, flat washers, rubber bungs and plastic spacer tubes stored away
safely for future use.
NOTE
During the removal of the bolts, spacer tubes fall inside the product. These can be removed
by tilting the product forward and recovering them from the floor or inside the base of
the machine.
To Next Page
Loading...
