Caple WMI4001 - Page 23

23
Instruction manual WMi4001
Please keep this instruction manual for future reference
KEY LOCK
Simultaneously pressing the TEMPERATURE SELECTION and SPIN SPEED buttons for
about 3 SECONDS, allows you to lock the keys. This way, you can avoid making accidental or
unwanted changes if a button on the display is pressed accidentally during a cycle.
The key lock can be simply cancelled by pressing the two buttons simultaneously again or
turning off the appliance.
DIGITAL DISPLAY
The displays indicator system allows you to be constantly informed about the status of
the machine.
1) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when the door is fully closed.
Close the door before selecting the
START/PAUSE button.
When
START/PAUSE is pressed on the machine with the door closed, the indicator will flash
momentarily and then illuminate.
If the door is not properly closed, the light will continue to flash for about 7 seconds, after
which the start command will be automatically cancelled. In this case, close the door properly
and press the
START/PAUSE button.
A special safety device prevents the door from being opened immediately after the end of the
cycle. Wait for
2 MINUTES after the wash cycle has finished and the DOOR LOCKED light has
gone out before opening the door. At the end of the cycle turn the programme selector to OFF.
2) SPIN SPEED INDICATOR LIGHTS
This shows the spin speed of the selected programme, you can reduce or omit by the
relevant button.
DIGITAL DISPLAY
The display’s indicator system allows you to be constantly informed about the status of
the machine.
1 ) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when the door is fully closed.
Close the door before selecting the
START/PAUSE button.
When
START/PAUSE is pressed on the machine with the door closed, the indicator will flash
momentarily and then illuminate.
If the door is not properly closed, the light will continue to flash for about 7 seconds, after
which the start command will be automatically cancelled. In this case, close the door properly
and press the
START/PAUSE button.
A special safety device prevents the door from being opened immediately after the end of the
cycle. Wait for
2 MINUTES after the wash cycle has finished and the DOOR LOCKED light has
gone out before opening the door. At the end of the cycle turn the programme selector to
OFF.
2) SPIN SPEED INDICATOR LIGHTS
This shows the spin speed of the selected programme, you can reduce or omit by the relevant
button.
Pre
6
3 172 48 5 6
3) WASH TEMPERATURE INDICATOR LIGHTS
This show the washing temperature of the selected programme that can be changed (where
allowed) by the relevant button. If you want carry out a cold wash all the indicators must
be off.