24 Instruction manual WMi4001 Please keep this instruction manual for future reference
3) WASH TEMPERATURE INDICATOR LIGHTS
This shows the washing temperature of the selected programme that can be changed (where
allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off.
4) CYCLE DURATION
When a programme is selected the display automatically shows the cycle duration, which can
vary, depending on the function selected.
During the initial filling phase of the cycle the machine calculates the actual cycle time needed
based on the load size, content and function selected. The real time of the wash will then be
displayed. This time can recalculate during the wash depending on detergent levels and
load balancing.
5) STAIN LEVEL INDICATOR LIGHTS
Once the programme has been selected, the indicator light will automatically show the stain
level set for that programme.
Selecting a different stain level, will light up the relevant indicator.
6) FUNCTION INDICATOR LIGHTS
Can be selected by the relevant button.
7) KEY LOCK INDICATOR LIGHT
The indicator light shows that the keys are locked.
8 ) KG LOAD
NOTE:
This function is active only on selected programmes.
During the first minutes of the cycle, the
“KG LOAD” indicator will remain on while the
intelligent sensor weighs the laundry and adjusts the cycle time, water and electricity
consumption accordingly.
Through every wash phase,
“KG LOAD” allows you to monitor information on the wash load
in the drum. In the first minutes of the wash it:
To Next Page
Loading...
