f) Move the chair in the desired position within the room (see section on
‘Positioning Your Chair’) then put your feet up, relax and enjoy!
Warning! Castors secure the chair but do not lock the chair in place. Castors
may not work as well on carpets or rugs with heavy tufting.
c) Slide the backrest into the base using the guides on the sides of the backrest.
When the base unit’s protruding prongs are in the guides on either side of the
backrest, push down on the backrest to ‘click’ this into place.
e) Seal fabric from the bottom of the
backrest to the base of the chair
using the Velcro strips.
d) Check that the handset is plugged into
the motor. If not, connect as per diagram
below.
1. ASSEMBLY INSTRUCTIONS – HEAT & MASSAGE
a) Remove all packaging from the chair base unit and backrest. Carefully unpack
all other items and ensure all parts are there.
To Next Page
Loading...