Carel boss Series - 3.7 Defining access profiles and users

15
+040000260 - 1.1 - 06.03.2019
ENG
5. Click Propagate: a window is displayed for
choosing the devices to propagate the values to.
6. Choose the devices and click Set: the new values
are propagated.
Note: “***” indicates that the value cannot be read.
Note: if the text box is empty, the value on the
device remains unvaried.
Note: To propagate all parameters to devices of
the same model, fi rst click Copy and then Propagate.
Note: To print the con guration parameters:
under Report à Commissioning report, add the
variables to be printed for each model. Click Print.
3.7 De ning access pro les and users
Each user accessing boss requires a user account. Users belonging to a certain profi le will have access to
specifi c functions (read-only or read/write) and a specifi c group of devices.
It’s recommended to use the default User, Service and Installer profi les provided.
To confi gure a new account, proceed as follows:
1. Under Users con guration open the Users page.
2. Add
3. Enter the user name.
4. Assign one of the existing profi les.
5. Enter the password.
6. Click Save: the user is added to the list.
Nota: If necessary, to customise the profi les enter
Con guration à User con guration à Pro les and
de ne a new pro le.