Need help?Do you have a question about the Carel µC2 and is the answer not in the manual?
General| Model/Series | µC2 |
|---|---|
| Protection Rating | IP20 |
| Storage Temperature | -20°C to +70°C |
| Relative Humidity | 10% to 90% non-condensing |
| Relay Outputs | 2 |
| Communication Protocols | Carel protocol |
General connection diagram for the µC² controller and its accessories.
Overview of the four parameter types based on user access level and function.
Parameters for setting and configuring temperature and pressure probes.
Parameters for configuring compressor operation settings.
Parameters for configuring defrost cycle settings and operation.
Parameters for setting and configuring fan operation and speed.
Parameters for configuring unit settings like model, circuits, and inputs/outputs.
Parameters for configuring alarm settings, delays, and reset modes.
Parameters for adjusting control settings like set points, differentials, and compensation.
Details on parameters for probe configuration and selection.
Parameters for configuring compressor operation and timing.
Parameters for configuring defrost cycle parameters.
Parameters for configuring fan operation, speed, and defrost modes.
Parameters for configuring unit specific settings and options.
Parameters for configuring alarm thresholds, delays, and reset behavior.
Parameters for adjusting control logic, set points, and differentials.
Detailed descriptions of compressor-related alarms and their causes.
Connection diagrams for the µC² controller, panel, and DIN rail versions.
Details on the EVD4* driver for electronic expansion valves.
To Next Page
