Need help?Do you have a question about the Carel Power+ PSD1016200 and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Frequency | 50/60 Hz |
| Protection Degree | IP20 |
| Cooling Method | Forced Air |
| Output Voltage | 0-480 V |
| Output Frequency | 0-500 Hz |
| Efficiency | 98% |
| Operating Temperature | -10 to 50°C |
| Humidity | 5% to 95% non-condensing |
| Input Voltage | 380-480V AC |
| Storage Temperature | -20°C to +70°C |
General guidelines and precautions for installing and operating the Power+ drive.
Essential safety procedures to follow before performing maintenance or operating the drive.
Guidelines and precautions for the electrical installation of the Power+ drive.
Detailed instructions for making electrical connections to the Power+ drive.
Pre-operation checks to ensure the drive is ready for use.
Table of rated input/output values, cable sizing, and fuse specifications.
To Next Page
