Need help?Do you have a question about the Carel Power + PSD2 Series and is the answer not in the manual?
General| Type | Inverter |
|---|---|
| IP Rating | IP20 |
| Protection degree | IP20 |
| Cooling method | Forced air cooling |
| Relative humidity | 5% to 95% non-condensing |
| Series | PSD2 |
| Power supply | 3-phase |
| Communication | Modbus |
| Operating temperature range | -10°C to 50°C |
Drive installation by qualified personnel in a complete unit or system, within a metal enclosure.
Disconnect drive and controls from power before maintenance. Wait 5 minutes after power off.
Overview of compact dimensions, operating temps, installation, network, compressor types, safety features, protection.
Lists product codes, power supply, output current, cooling type, and frame size for different models.
Identifying the drive via its rating plate, which shows code, serial number, production date, and revision.
Illustrates physical components: power/control connections, fan, PE, LED, and switches.
Provides weight data and overall dimensions for various drive configurations.
Instructions for installing the drive with heat sink outside the panel and for panel mounting.
Specifies required air flow and ventilation for the drive and minimum installation clearances.
Details drive terminals, LEDs, and crucial safety precautions before electrical work.
Guidance on EMC compliance, referencing electrical connections and user manual.
Warnings and guidelines for drive wiring, including cable sizing, fuse selection, and cable separation.
A comprehensive wiring diagram illustrating power, motor, and communication connections.
Details on Coldplate models, differences, mounting, and dimensions for thermal management.
Assembly and dimension details for models featuring a finned heatsink but lacking a fan.
Essential pre-commissioning checks for the drive, including current, voltage, and wiring.
Procedures for regular maintenance to ensure optimal operating conditions and longevity.
Key specifications including input/output currents, cable sizing, and fuse requirements.
To Next Page
