2 Threaded extenders for pull-pull cables, M3. (nosegear steering)
4 Sheetmetal screw 2.9Ø x 13mm (nose steering servo fixing)
1 Button-head bolt, M3 x 6mm (for fixing exhaust nozzle to fuselage)
1 Heatshrink tube, 6mm I.D., 70 mm long (nosegear steering)
2 Sheetmetal screws Ø2.9 x 13mm (to secure front tank stop)
4 Allen bolt, M4 x 16 (to secure small engine mount plates)
4 Locknut, M4 (to secure small engine mount plates)
4 Washer, M4 (to secure small engine mount plates)
2 Allen bolts, M3 x 16mm (to secure upper bypass)
2 T-nuts, M3 (to secure upper bypass)
2 Washers, M3 (to secure upper bypass)
1 Velcro strap, 500mm long (to secure bypass cover)
2 Plastic Grommet, 7mm I.D (bypass tube protection)
2 Plastic grommet, 12mm I.D (bypass connector protection)
1 Fibreglass band, 20mm wide x 350mm long (inlet joiner)
Wing pack
Quantity Description
2 Allen bolt, M4 x 45mm (wing fixing)
4 Washers, M4 (for wing bolts)
18 Sheetmetal screw, 2.9Ø x 10mm (fixing servo & LG covers to wing)
8 Allen bolt, M4 x 16mm (fixing landing gear)
8 T-nuts, M4 (fixing landing gear)
16 Sheetmetal screws, 2.9Ø x 13mm (fixing servos to mounts)
6 Clevise, steel, M3 (aileron/flap linkages)
6 Nut, M3 (aileron/flap linkages)
2 All-thread M3 x 60mm (aileron linkages)
2 All-thread M3 x 75mm (flap linkages)
2 Ball-link, M3 (aileron linkages)
2 Allen bolt, M3 x 16mm (for securing ball links to phenolic horns)
2 Locknut, M3 (for ball-links)
4 Sheetmetal screws 2.2Ø x 10mm (for securing tank hatch)
Vertical Fin/Rudder pack
Quantity Description
1 Ball-link M3 (rudder linkage)
1 Allen bolt, M3 x 16mm (rudder linkage)
1 Lock-nut, M3 (rudder linkage)
1 Nut, M3 (rudder linkage)
1 Clevise, steel, M3 (for rudder linkage)
1 All-thread, M3 x 120mm (rudder linkage)
4 Sheetmetal screw 2.9Ø x 13mm (servo fixing)
1 Aluminium tape, 350mm x 50mm wide
Stabiliser/Elevator pack
Quantity Description
2 Allen Bolt, M4 x 30mm (for fixing stab to fuselage)
2 Ball-Link, M3 (elevator linkages)
8 Washer, M3 (for M3 servo mounting bolts)
2 Clevise, steel, M3 (elevator linkages)
2 Nut, M3 (elevator linkages)
8 Sheetmetal screw, 2.9Ø x 10mm (for fixing stab servo hatches to stab)
33
To Next Page
Loading...
