V1.0 / 02.2012 #280201
#280201 Saddle Tank Set for CARF Ultra Flash
Installation Instructions
The saddle tanks can either be used for additional fuel or as smoke tanks. In the plane shown the
saddle tanks get used as additional fuel tanks and additionally the wing tank #670202 is used as a
smoker tank. Depending on your personal preference this can also be done the other way around.
This picture shows the complete saddle tank set as it comes. Each tank carries aprox. 900ml of
liquid (Fuel or Smoke). (Together aprox. 1.8 liters)
Also included are 2 filter-clunks and the necessary plumbing material except tubing.
The next pictures show the positioning of the tanks in the fuselage. The tanks get glued in with
either 30min Epoxy or with silicone (recommended).
Before gluing the tanks in, sand all relevant surfaces with 120grid sand paper and clean out the
surface with a paper towel and white gas.
To Next Page
Loading...
