Carlisle DeVilbiss PROLite Series - Service Parts

EN
36 *
37
39
40 *
41
42 *
43
44
45
46
47
48
49
51
52 +
53
54
905281
905206
+ NOT INCLUDED IN THE GUN KIT, ONLY WITH REF 22
SEAL AND PIN KIT, KIT OF 5 (ITEMS 32, 34 & 36)
SPRAY GUN REPAIR KIT (INCLUDES ITEMS MARKED *)
1
PARTS LIST (Continued)
905203
SPREADER VALVE PIN
PART No.
1
1
1
REF.
1
GRAVITY CUP
-
1
SERVICE PARTS
WARNING
TRIGGER
TRIGGER SCREW
-
SPREADER VALVE ADJUSTING KNOB
FILTER (KIT OF 5)
1
The spray gun must be earthed to dissipate any electrostatic charges which may be created by fluid
or air flows. This can be achieved through the spray gun mounting, or conductive air/fluid hoses.
Electrical bond from the spray gun to earth should be checked and a resistance of less than 10⁶ Ohms
is required.
905307
GRAVITY CUP LID
GRAVITY CUP KIT
QTY.
-
1
-
DESCRIPTION
1
VALVE BODY
1
905204
AIR INLET
905207
1
1
905305
AIRFLOW VALVE
1
905306
TRIGGER, STUD & SCREW KIT
2
905296
TOOL KIT
1
TORX DRIVER (KIT OF 2)
-
SPREADER VALVE ASSEMBLY
TRIGGER STUD
905275
905276
AIR VALVE SERVICE TOOL
-
-
1
-
1
1
COLOUR ID RING KIT (4 COLOURS)
905289
38
1
DRIP CHECK LID (KIT OF 5)
905202
50
SB-E-2-996 R1.0
7/24
www.carlisleft.com