35
Properties / Service Test This is service test. Defaults are shown.
Password Level: Admin
Properties / Alarms See page 47 for details on alarms.
Password Level: None
Alarms Views alarms from the controller. To access select the
exclamation point in the top left of the screen from the
Snapshot screen.
Trends
NOTE: Example screen shown.
Review trends for points that have trending enabled.
Access from the Snapshot screen by selecting the icon
in the lower right of the screen.
Select Analog for measured values such as tempera-
ture or Digital for on/off status.
Table 8 — App Controller Screen Navigation (cont)
SCREEN NAMES DISPLAY DETAILS
To Next Page
Loading...