Carrier 19XR - Page 20

20
Table 13 — 19XR Two-Stage Compressor Frame Size 7
Heat Exchanger Weights (SI) (cont)
*Rigging weights are for standard tubes of standard wall thickness (0.025-in. [0.635 mm]
wall) and do not include refrigerant weight.
†See Model Number Nomenclature on page 5.
NOTES:
1. Cooler weight includes the suction elbow and the distribution piping to the economizer
and two-pass Victaulic dished heads.
2. Condenser weight includes the high side float chamber, discharge pipe, and the distri-
bution piping weight from the economizer to the float chamber and two-pass Victaulic
dished heads.
CODE†
DRY RIGGING WEIGHT (kg)* REFRIGERANT WEIGHT (kg) WATER WEIGHT (kg)
COOLER ONLY CONDENSER ONLY COOLER ONLY CONDENSER ONLY COOLER ONLY CONDENSER ONLY
D60 — 17 371 — 951 — 5204
D61 — 17 973 — 951 — 5583
D62 — 18 611 — 951 — 5992
D65 — 17 066 — 951 — 5269
D66 — 17 616 — 951 — 5619
D67 — 18 352 — 951 — 6083
D80 — 19 013 — 1070 — 5646
D81 — 19 678 — 1070 — 6073
D82 — 20 395 — 1070 — 6532
D85 — 19 077 — 1070 — 5719
D86 — 19 690 — 1070 — 6112
D87 — 20 504 — 1070 — 6634
D6A — 16 005 — 883 — 5171
D6B — 16 478 — 883 — 5559
D6C — 16 914 — 883 — 5932
D6F — 15 625 — 883 — 5193
D6G — 16 165 — 883 — 5628
D6H — 16 630 — 883 — 6023
D8A — 17 461 — 993 — 5609
D8B — 17 977 — 993 — 6045
D8C — 18 475 — 993 — 6465
D8F — 17 454 — 993 — 5633
D8G — 18 035 — 993 — 6123
D8H — 18 562 — 993 — 6567