Caster Installation Instructions– SF/DF Models
Caster Kit #
52-2777-01 SF Models
52-2777-02 DF Models
CASTER INSTALLATION 35
1. Attach the casters to the channels with 5/16 x 1/2"
bolts and hex nuts. The two casters with locks may
be placed at any position desired.
2. Lift one end of the cabinet and place the caster and
channel assembly under the cabinet base with the
channel flanges against the cabinet base.
3. Attach the caster mounting channels to the base of
the cabinet by screwing through the flanges of the
caster channel into the side of the cabinet base with
seven (7) of the #10 self-drilling sheetmetal screws
supplied with the kit.
4. Repeat steps 2 and 3 on the other end of the cabinet.
To Previous Page
Loading...
