Carrier 30AJ - Unit Dimensions; 30 AJ 004 E 005; 30 Aj 010

63
5.2 - UNIT DIMENSIONS
WATER OUTLET
AIR DIRECTION
AIR DIRECTION
AIR DIRECTION
WATER OUTLET
WATER INLET
Before placing the unit on the site check the following items (all models):
a) The floor shall bear the weight of the unit in operation. (See item 2 - Physical Data). Refer to the structural project of
the building for the applicable regulations concerning the admissible load. If required, reinforce the structure.
b) Choose a location with space enough to allow repairs and general maintenance services. The front of the equipment
shall be free to allow the air flow and the access to the unit inside.
5.2.1 - 30AJ 004 e 005
ROTATION DIRECTION
WATER INLET
ACCESS TO THE
EXPANSION VALVE
Before placing the unit on the site check the following items (all models):
a) The floor shall bear the weight of the unit in operation. (See item 2 - Physical Data). Refer to the structural project of
the building for the applicable regulations concerning the admissible load. If required, reinforce the structure.
b) Choose a location with space enough to allow repairs and general maintenance services. The front of the equipment
shall be free to allow the air flow and the access to the unit inside.
5.2.2 - 30AJ 010
2 THREADS
THREAD
THREAD