Need help?Do you have a question about the Carrier 30HXC 080-375 and is the answer not in the manual?
General| Model | 30HXC 080-375 |
|---|---|
| Category | Chiller |
| Refrigerant | R-134a |
| Compressor Type | Screw |
| Efficiency | High efficiency |
| Application | Commercial and Industrial |
| Cooling Capacity Range | 80-375 tons |
| Full Load Efficiency | 0.62 kW/ton |
| Voltage | 380-415V/3/50Hz |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Type | Water-Cooled |
Critical safety warnings regarding refrigerant, oxygen, welding, and electrical work.
Precautions for refrigerant spills, eye protection, container handling, and pressure testing.
Procedures for inspecting the unit upon delivery for damage or missing parts.
Guidelines for safely moving and positioning the chiller unit.
Requirements for power supply, phase imbalance, and calculations.
Details on compressors, oil filter, refrigerant, lubricant, and unloading system.
Procedures and precautions for adding refrigerant charge.
Description of pressure sensors and procedures for adding oil.
Procedure for diagnosing and correcting EXD or Economizer issues.
Methods to identify and rectify low refrigerant charge for 30HXC and 30GX models.
Step-by-step guide for replacing the oil filter.
Guidelines for compressor replacement and ensuring correct rotation.
Fields for job details and checklist for unit installation verification.
Procedures for initial unit start-up and checking cooler pressure drop.
Final steps for starting the chiller and recording operating temperatures/pressures.
To Next Page
