EasyManua.ls Logo

Carrier 30HXC090 User Manual

Carrier 30HXC090
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
30HXC 080-375
30GX 082-358
Screw Compressor
Water-Cooled Liquid Chillers and
Air-Cooled Liquid Chillers
30HXC Nominal cooling capacity 290-1325 kW
30GX Nominal cooling capacity 285-1205 kW
50 Hz
Installation, operation and maintenance instructions
GLOBAL CHILLER

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Carrier 30HXC090 and is the answer not in the manual?

Carrier 30HXC090 Specifications

General IconGeneral
Cooling Capacity90 tons
RefrigerantR-134a
Compressor TypeScrew
Voltage460 V
Energy Efficiency Ratio (EER)10.2

Summary

Introduction and Safety

General Safety Precautions

Essential safety guidelines for operating and maintaining the equipment.

Unit Dimensions and Clearances

30HXC 080-190 Dimensions & Weight

Physical dimensions and weight for 30HXC 080-190 models.

30HXC 200-375 Dimensions & Weight

Physical dimensions and weight for 30HXC 200-375 models.

30GX 082-182 Dimensions & Weight

Physical dimensions and weight for 30GX 082-182 models.

30GX 207-358 Dimensions & Weight

Physical dimensions and weight for 30GX 207-358 models.

Physical and Electrical Specifications

Compressor Electrical Specifications

Detailed electrical specifications for compressors.

Electrical Data for High Condensing Temperatures

6- Electrical Data for Units with High Condensing Temperatures

Data for units operating at high condensing temperatures.

Option 150 and 150A

Details on optional configurations for high condensing temperatures.

Application Data and Performance

Unit Operating Range

Defines the operational limits for evaporator and condenser.

Installation and Flow Control

Lifting and Piping Procedures

Electrical Characteristics and Wiring

Wire Sizing and Control Wiring

System Components and Operation Data

14.1 - Geared Twin Screw Compressor

Details on the geared twin screw compressor used.

14.5 - Electronic Expansion Device (EXD)

Explanation of the EXD control module and operation.

Maintenance Procedures

Refrigerant Charging Procedures

Procedures and precautions for adding refrigerant.

Low Charge Indication (30HXC)

How to identify and address low refrigerant charge on 30HXC.

Adding Charge to 30HXC Systems

Step-by-step guide for adding refrigerant to 30HXC.

Low Charge Indication (30GX)

How to identify low charge on 30GX systems.

Oil Charging Procedures

Procedures for adding oil to the system.

Compressor Replacement Considerations

Critical considerations for compressor replacement.

EXD Troubleshooting Procedure

Steps to diagnose and correct EXD/Economizer problems.

Start-Up and Operational Checks

Preliminary Equipment Checks

Checklist for verifying unit installation and connections.

Unit Pre-Start Checks

Pre-start checks for the unit.

Perform TEST Function

Instructions for performing the TEST function.

Chiller Start-Up Steps

Final steps before starting the chiller.

Related product manuals