NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict.
Sides and End — 6 (1.8 m) from solid surface.
Airflow Side — 8 (2.4 m) required for coil service
area.
2. All pumps have drains located at the bottom of
volute for draining.
3. Temperature relief devices ocated on suction line,
liquid line and filter drier of each circuit and have
1
/
4
flare connection.
4. No pump package leaving water connection is
same size and has same Y and Z dimensions as
entering water. Also has same PDx dimension as
pump package.
5. Dimensions are in mm [inches].
a30 5332
MCHX — Microchannel Condenser Coil
Fig. 6 — 30RB110 Air-Cooled Chiller Dimensions