Carrier 30RQ - 4.3.11.5 - Description of Date and Time configuration sub-menu; 4.3.11.6 - Description of the Time Schedules sub-menus

24
4.3.11.5 - Description of Date and Time configuration sub-menu

  
0 dAtE MEnu When selected this item authorises return to the previous menu.
1 n
1
n
2
n
3
n
4
00:00 to 23:59
 setting.
n
1
n
2
: hours (00 to 23). The rst time the Enter button is continuously pressed, the rst two characters in the 4-digit display ash so that hours
can be adjusted.
n
3
n
4
: minutes (00 to 59). Continuous pressing of the Enter key again causes the last two characters to ash and minutes can be adjusted.
2
«Mon»
«tUe»
«uEd»
«tHu»
«FrI»
«SAt»
«Sun»
 setting.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3 n
1
n
2
n
3
n
4
01:01 to 31:12
 setting. The control mode is the same as for the time.
n
1
n
2
:day (01 to 31).
n
3
n
4
:month (01 to 12).
4 n
1
n
2
n
3
n
4
setting.
5 YES/no  One hour is added when summertime starts, and one hour is deducted when it ends. The time changes at 2.00 am.
6 nn 
7
«Mon»
«tUe»
«uEd»
«tHu»
«FrI»
«SAt»
«Sun»

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
8 0 to 5 
9 nn 
10
«Mon»
«tUe»
«uEd»
«tHu»
«FrI»
«SAt»
«Sun»

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
11 nn 
4.3.11.6 - Description of the Time Schedules sub-menus
The control provides two timer programs: schedule 1 and
schedule 2 that can be activated.
The first timer program (schedule #1) provides a means to
automatically switch the unit from an occupied mode to an
unoccupied mode: the unit is started during occupied
periods.
The second timer program (schedule #2) provides a means to
automatically switch the active setpoint from an occupied
setpoint to an unoccupied setpoint: cooling setpoint 1 is
used during occupied periods, cooling or heating setpoint 2
during unoccupied periods.
Each schedule consists of eight time periods set by the
operator. These time periods can be flagged to be in effect or
not in effect on each day of the week plus a holiday period.
The day begins at 00.00 hours and ends at 23.59 hours.
Program is in unoccupied mode unless a schedule time
period is in effect. If two periods overlap and are both
active on the same day, the occupied mode takes priority
over the unoccupied period.
Each of the eight periods can be displayed and changed
with the aid of a sub-sub-menu. The table below shows
how to access the period configuration. Method is the
same for the time schedule #1 or the time schedule #2.

  
0 Period X Menu Indicates the period (X) you are going to congure.
When selected this item authorises a return to the
main menu.
1 n
1
n
2
n
3
n
4
00:00 to 23:59
.
Authorises entering the time of day at which the
occupied period starts.
2 n
1
n
2
n
3
n
4
00:00 to 23:59
.
Authorises entering the time of day at which the
occupied period ends.
3 Mo- 0 or Mo- 1 1 = the period is in eect on .
0 = period not in eect on Monday
4 tu- 0 or tu- 1 1 = the period is in eect on .
0 = period not in eect on Tuesday.
5 UE-0 or UE- 1 1 = the period is in eect on .
0 = period not in eect on Wednesday.
6 tH- 0 or tH- 1 1 = the period is in eect on.
0 = period not in eect on Thursday.
7 Fr-0 or Fr- 1 1 = the period is in eect on .
0 = period not in eect on Friday.
8 SA- 0 or SA- 1 1 = the period is in eect on .
0 = period not in eect on Saturday.
9 Su- 0 or Su- 1 1 = the period is in eect on .
0 = period not in eect on Sunday.
10 Ho- 0 or Ho- 1 1 = the period is in eect on  .
0 = period not in eect on public holidays.
 n
1
n
2
: hours (00 to 23). The rst time the Enter button is continuously pressed,
the rst two characters in the 4-digit display ash so that hours can be
adjusted.
n
3
n
4
: minutes (00 to 59). Continuous pressing of the Enter key again causes the
last two characters to ash so that minutes can be adjusted.