12
Advanced Programming Options
To hold it at home, away or sleep
Advanced programming display codes
There might be situations when you want to override the
programming and hold the home’s temperature at one of
the three home, away or sleep comfort levels. This is useful
when you’re going on vacation or traveling, or when you’re
home unexpectedly. Here’s how to prevent the thermostat
from changing temperatures when it reaches the next
programming time period.
Open the door. 1.
Press the desired button under the display – home 2.
(
), away ( ) or sleep ( ).
Press the hold ( 3.
) button on the left side. You will
see the ashing schedule activate icon (
) will
disappear.
To return to your original programming schedule, 4.
press the hold (
) button. You will see the ashing
schedule activate icon (
) will stop and that
particular icon will be constantly displayed.
Close the door. 5.
You can customize several features of your NUI. This table
shows which features you can change and the codes
(parameter number) associated with them. The codes
(parameter number) will be shown on the display when you
follow the instructions.
To make a temporary change
Open the door. 1.
Press the home ( 2.
), away ( ) or sleep ( )
button that you want. You will see the symbol
ashing on the display which represents temporary
hold. The system will change to the temperature
settings programmed for that lifestyle period. It will
maintain that temperature setting until the next
power o, the next programming time period or
someone has changed that setting.
To return to the originally programmed lifestyle 3.
period, press the appropriate home, away or sleep
button. The system will return to that time period and
the ashing schedule activate icon (
) will stop
and that particular icon will be constantly displayed.
Close the door.4.
English
To Next Page
Loading...
