37MARAQ: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
10
ACCESSORIES
The system is shipped with the following accessories. Use all of the installation parts and accessories to install the system. Improper installation may
result in water leakage, electrical shock and fire, or cause the equipment to fail. Keep the installation manual in a safe place and do not discard any
other accessories until the installation work has been completed.
Table 3 — Accessories
Fig. 2 — Outdoor Unit
NOTE:
- If the outdoor unit is higher than the indoor unit, prevent rain from flowing into the indoor unit along the connection pipe by making a
downward arc in the connection pipe before it enters the wall to the indoor unit. This ensures that rain drips from the connection pipe
before it enters the wall.
- Piping and the interconnecting wiring are field supplied.
- Figure 2 is only a sketch. The actual model may differ slightly.
Table 4 lists the units covered in this document.
Table 4 — Unit Sizes
NOTE: Before installing the indoor unit, ensure the compatibility with the outdoor unit using the product data as a reference.
PART NO. PART NAME QTY.
1 Outdoor unit 1
- Literature package including installation instructions and warranty 1
- Mounting pads for the outdoor unit (helps with vibration prevention during unit operation) 4
-Drain Joint 1
-Drain Hose 1
SYSTEM TONS BTUH VOLTAGE MODEL
1 12,000 115-1 37MARAQ12AA1
0.75 9,000 208/230-1 37MARAQ09AA3
1 12,000 208/230-1 37MARAQ12AA3
1.5 18,000 208/230-1 37MARAQ18AA3
2 24,000 208/230-1 37MARAQ24AA3
2.5 30.000 208/230-1 37MARAQ30AA3
3 36,000 208/230-1 37MARAQ36AA3
To Next Page
Loading...
