37MARAQ: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
11
INSTALLATION
• A location which is convenient to installation and not exposed to
strong winds.
• A location which can bear the weight of the outdoor unit and where
the outdoor unit can be mounted in a level position.
• A location which provides appropriate clearances (see Fig. 6).
• Allow sufficient space for airflow and service of the unit. See Fig. 6
for the required minimum distances between the unit or walls.
NOTE: DO NOT install the indoor or outdoor units in a location with
special environmental conditions. For those applications,
contact your Ductless representative.
DIMENSIONS
Table 5 — Dimensions and Weights
Prior to Installation
Before installing the indoor unit, ensure the compatibility with the
outdoor unit using the product data as a reference. It is also
necessary to confirm the proper application of the equipment and to
perform a heat load calculation for proper sizing.
WA R N I N G
SYSTEM SIZE 12K 9K 12K 18K 24K 30K 36K
(115 V) (208/230 V) (208/230 V) (208/230V) (208/230 V) (208/230 V) (208/230 V)
Height (H)
in
(mm)
21.85 (555) 21.85 (555) 21.85 (555) 26.50 (673) 31.89 (810) 31.89 (810) 31.89 (810)
Width (W)
in
(mm)
30.12 (765) 30.12 (765) 30.12 (765) 35.04 (890) 37.24 (946) 37.24 (946) 37.24(946)
Depth (D)
in
(mm)
11.93 (303) 11.93 (303) 11.93 (303) 13.46 (342) 16.14 (410) 16.14 (410) 16.14 (410)
Weight - Net
lbs.
(kg)
64.6 (29.3) 62.17 (28.2) 62.17 (28.2) 92.59 (42) 122.14 (55.4) 142.86 (64.8) 150.36 (68.2)
To Next Page
Loading...
