Carrier 40GXQ User Manual

5
Remote Control Display
AUTO
FAN
OPER
º
F
º
C
HOUR
ON/OFF
:
1
2
11
6
7
9
15
14
13
12
8
5
4
10
3
A09627
1
TRANSMISSION INDICATOR: Illuminates when remote
control transmits a signal to the indoor unit.
2
ON/OFF INDICATOR: This symbol appears when the unit
is turned on by the remote control, and is not displayed when
the unit is turned off.
3
FAN SPEED DISPLAY: Indicates the set fan speed. AUTO
is displayed when fan is set to AUTO mode.
4
MODE DISPLAY: Indicates the current operation mode
“AUTO”, “COOL”, “DRY”, “FAN ONLY”, or “HEAT”
AUTO
COOL
DRY
FAN
HEAT
(only for cooling and heating unit)
A09628a
5
SLEEP DISPLAY: Indicates unit is running in SLEEP mode.
6
TEMPERATURE DISPLAY: Temperature setting from
61_F(16_C) to 86_F(30_C) will be displayed. If FAN mode
is selected, there will be no temperature displayed.
7
CLOCK DISPLAY: Indicates the current time (0 to 24
hours).
8
CLOCK INDICATOR: Displayed with time and is not
displayed when setting ON/OFF timer.
9
TIMER ON / TIMER OFF DISPLAY: ON is displayed if
TIMER ON is set. OFF is displayed if TIMER OFF is set.
ON OFF is displayed if both ON and OFF timers are set.
10
TURBO DISPLAY: Indicates unit is running in TURBO
mode.
11
DRY COIL DISPLAY: Indicates unit is running in DRY
COIL mode where the fan continues to run after the unit is
shut off to dry the coil.
12
TEMPERATURE DISPLAY: Indicates if room temperature
or set point temperature is being displayed on the front panel.
13
SWING DISPLAY: Indicates that louvers are moving
continuously for better air distribution.
14
LIGHT DISPLAY: Indicates if LED display on the front
panel is illuminated or not.
15
LOCK DISPLAY: Indicates if remote control is locked or
not. (Available on 40GXC(Q) models only)
NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols are
displayed.

Carrier 40GXQ Specifications

General

Brand	Carrier
Model	40GXQ
Category	Air Conditioner
Language	English