40
IPM malfunction or IGBT over-strong current protection diagnosis and solution (PO)
Error Code PO
Malfunction decision conditions When the voltage signal that IPM sends to the compressor drive chip is abnormal, the LED display will show
“PO” and the AC will turn off.
Supposed causes
S Wiring mistake
S IPM malfunction
S Outdoor fan assembly faulty
S Compressor malfunction
S Outdoor PCB faulty
NOTE: In figures 41- 46 the following is observed:
S U,V,W references compressor connection point
S P references input voltage
S N references output voltage
To Next Page
Loading...
