Carrier 40MAQ Series - Disassembly Instructions

51
DISASSEMBLY INSTRUCTIONS
NOTE: This part is for reference only and the photos may differ from your unit.
Indoor
unit
No.
Parts name
Procedures
Remarks
1
Front panel
How to remove the front
panel.
1) Pull the bottom side of
the panel and release the
clips. Then remove the
front panel.
2) Remove the filter and
horizontal louver.
3) Remove the four
fixing screws.
4) Remove the cover
(one screw).
5) Lift the panel frame
and release the connector
of display assembly.’
connectors. Then remove
the panel frame
assembly.
Overview:
Connector for
display ass’y
Clip
One screw
fixing the cover
Clip
Panel
Filter
Four screws