40MBFAQ: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
10
ELECTRICAL
Connections
Remove the sensing device’s installation bearer (see Fig. 13).
Fig. 13 — Remove the sensor bracket
ELECTRICAL DATA
Table 8 — Electrical Data
INDOOR UNITS
INDOOR FAN
MAX FUSE CB AMP
V-PH-HZ FLA (A) HP
SYSTEM POWER
FACTOR (%)
12K 208-230/1/60 0.5 1/55 95.6
Refer to outdoor unit installation instructions.
Indoor unit is powered by the outdoor unit.
To Next Page
Loading...
