Carrier 40MFC - Page 33

33
A1 -- Control Board Input/Output Value -- 38--40MFC(Q)009---1 / 38--40MFC(Q)012---1
CONNECTOR
38MFC(Q)009---1 / 38MFC(Q)012---1
CONTROL BOARD INPUT or OUTPUT VALUE
L_IN Voltage ：AC 110V
CN11 Voltage ：AC110V
CN16 Relative to the N terminal voltage：DC 24V
CN6 Maximum output voltage ：ac110V
CN4 Maximum voltage：DC12V
CN5 Maximum voltage between the lines：DC12V
P_1 Ground
CN8 Maximum voltage：DC5V
CN9 Maximum voltage：DC5V
CN10A Maximum voltage between the lines：DC5V
CONNECTOR
40MFC(Q)009---1 / 40MFC(Q)012---1
CONTROL BOARD INPUT or OUTPUT VALUE
CN1 Output:Pin5&6(12V) Pin1-Pin4:Pulse waveform,(0-12V)
CN14 Input:Pin1 (3.3V) Pin2(0-3.3V),Normal value about3.3V
CN15 Input:Pin1 (0-1.8V) Pin2(1.8V)
CN16 Input:Pin3 & Pin4(0-1.8V) Pin1 & Pin5(1.8V)
CN10 Output:Pin1-Pin5(0-115V high voltage )
CN33 Output:115V high voltage
CN34 Output:115V high voltage
CN26,CN28 Output:115V high voltage
CN4 Input:115V high voltage
CN5 Input:115V high voltage
CN6 Connection to the earth
CN7 Output: Connection of the high voltage
CN8,CN9 Output:High voltage
CN36,CN37 Output:High voltage
N-B Output:High voltage
CN17 Output:Pin1(3.3V) Pin2(GND) Pin3-4 Pulse(0-3.3V)
UV W Output:Pulse(0-320V)