40MUAA: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
8
Reversing Instructions
1. Remove the filter door, then take the filter off.
Fig. 13 —Remove the Filter
2. Remove the upper cover assembly.
Fig. 14 —Remove Upper Cover Assembly
3. Remove the evaporator cover plate.
Fig. 15 —Remove Evaporator Cover Plate
4. Unplug temperature sensors T1, T2, T2A, T2B and electronic
expansion valve (EEV) from the control board.
T1: Room temperature sensor
T2: Evaporator central sensor plug
T2A: Evaporator input sensor plug
T2B: Evaporator output sensor plug
Fig. 16 —Unplug Temperature Sensors
NOTE: T2A and T2B are only available for some models.
To Next Page
Loading...
