Carrier 40MVQ - Indoor Unit 40 MVQ Physical Data

To Next Page

To Previous Page

CONNECTION DIAGRAMS

CONNECTING CABLE

CONTROL

Notes:

1. Do not use thermostat wire for any connection between indoor and outdoor units.

2. All connections between indoor and outdoor units must be as shown. The connections are sensitive to polarity.

3. On the 18k and 24k units, the “S” terminal “CONTROL” output is pulse DC with a potential AC voltage shock hazard.

A07654

Fig. 13 --- Connection Diagrams

38/40MVC, MVQ

Other manuals for Carrier 40MVQ