Carrier 40VK S-8S-TST Series - Page 23

EN
■
Preset Operation
Set your preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airow direction).
1
Select your preferred operation.
1
Press the PRESET button for 3 seconds to
memorize the setting.
The P mark is displayed.
When you press this button next time, the memorized
operation mode will be enabled.
■
ECO SLEEP operation
ECO SLEEP mode is a OFF timer operation with
automatic temperature and fan speed adjustment.
ECO
SLEEP
1
1
Press the ECO SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
CAUTION
The ECO SLEEP mode is not enabled in the
DRY or FAN ONLY operation.
NOTE
• For the cooling operation, the set temperature
will automatically increase 1 degree/hour for
2 hours (maximum 2 degrees increase).
• During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
- 22 -
01_1130550209_EN.indd 2201_1130550209_EN.indd 22 7/7/2566 BE 16:007/7/2566 BE 16:00