EN
10 TEMPORARY OPERATION
 ■
 TEMPORARY operation
This function is used to operate the unit temporarily in case you misplace the wireless remote controller 
or its batteries are exhausted.
•  Push the [RESET] button once (less than 3 seconds) to start the air conditioner. 
•  The last operation conducted with the wireless remote controller will be performed. (When wireless 
remote controller is not used, models with the auto-changeover (cooling) function perform “A” 
operation, and those without the function perform cooling operation (set temperature: 24 °C, fan: 
HIGH).)
I cannot nd the 
remote controller
A temporary 
operation feature 
is provided!
 CAUTION
Continuous pressing of the [RESET] button for 10 seconds and above will start the forced cooling 
operation.
(This will impose burden on the air conditioner. Do not perform this for the purposes other than test run.)
In this time all indicators of indoor unit go on.
- 26 -
01_1130550209_EN.indd   2601_1130550209_EN.indd   26 7/7/2566 BE   16:007/7/2566 BE   16:00