42ADF025, 42ADF035
Use of the Remote Control
12
OFF timer procedure
1. OFF TIMER button
(button L)
Press button .
The OFF timer icon and numbers for
time
selection are flashing.
This function can be set even if the
remote
control is OFF.
2. HOUR/MINUTE selection
buttons (buttons and )
To set the clock time, press either button
or .
To move from hour to minute, press
button
.
Press button
again to confirm.
DAILY timer (Everyday-button J)
Push the button when the ON or OFF timer is active. The
icon will appear on display. In this way the ON and OFF timer
memorization will be repeated every day. To disactivate the daily
function, press again the button
.
Combination of ON, OFF and DAILY timer
procedure
If you want operation to start at 5:30 P.M. and stop at 10:30 P.M.
proceed as follows:
1. Select ON timer at 5:30 P.M.
2. Select OFF timer at 10:30 P.M.
3. Select desired operating mode (button )
PM
PM
If you want to stop operation at 10:30P.M. and start again at
7:30 A.M. with the same operating mode, preceed as follows :
1. Select OFF timer at 10:30 P.M. during operation.
2. Select ON timer at 7:30 A.M.
If you want Everyday operation to start at 5:30 P.M. and stop at
10:30 P.M. proceed as follows :
1. Select ON timer at 5:30 P.M.
2. Select OFF timer at 10:30 P.M.
3. Press the EVERYDAY button daily button |
Cancellation of ON, OFF and DAILY timer
procedure
PM
1. If you want to cancel ON or OFF timer
setting, press the following buttons in
sequence:
• button
or ;
• button
To deactivate the Everyday function,
press button will remain operation
.
The Everyday function will remain
operative until one of the two timers
(ON or OFF) is active.
To Next Page
Loading...
