Carrier 42HQE018 - Names and Functions of Indicators on Remote Controller

42HQE009 / 012 / 018 / 022
GB - 7
ENGLISH
Names and functions of indicators on remote controller
 Transmission Indicator
This transmission indicator lights when
remote controller transmits signals to the
indoor unit.
 Mode display
Displays the current operation mode.
Including AUTO, COOL, DRY,
HEAT(cooling only type without), FAN
ONLY and back to AUTO.
 ON/OFF display
Displayed by pushing the ON/OFF
button. Push the ON/OFF button again to
disappear.
 Temp. Display
Displays the temperature setting (17 ºC to
30 ºC). When you set the operating mode
to FAN ONLY, no temperature setting is
displayed.
 Clock display
The current time is indicated.(0~24 hours)
AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED
AUTO LOW MED HIGH









 Timer display
The time set for timer operation is
indicated. (0~24 hours)
 Lock display
Displayed by pushing the Lock button.
Push the Lock button again to disappear.
 Fan speed display
Displays the selected fan speed, AUTO
and three fan speed levels "LOW" "MED"
"HIGH" can be indicated. Displays AUTO
when the operating mode is either AUTO
or DRY.
 Econo. Display (Some models without)
Display by pushing the ECONO. button.
Push the ECONO. Button again to
disappear.
• In the illustration, all displays are indicated
for the sake of clarity. During operation,
only the relevant displays will be shown on
the remote controller.