Carrier 42LUVH045N - Air Conditioner Functions Overview

4
2. Function
When the power supply is
interrupted and then restore, the
air conditioners automatically
restore the previous function
setting.
Tele Remote control (Optional)
Maintain the room temperature in accordance
With the setting temperature.
The mode can be change by the room
temperature.
The louver can be set at the desired position
or swing up and down automatically
The function is usually used in rainy days
in springtime or damp areas.
The fan is turn to low speed (cooling/heating).
The unit will be turn off at the seventh hour.
The unit will decide the louver direction
according to
operation mode.
Turbo wind,high,med,low,breeze.
Restarting is for approx. 3 minutes..
Prevent the water being frozen on evaporator by
sensing the evaporator pipe temperature in cooling
mode
Room temperature sensor.
Pipe temperature sensor.
Indoor unit
Operation by remote controller
Sensing by room temperature
Room temperature control
Anti-freezing control in cooling
Time Delay Safety control
Indoor fan speed control
Two-direction air vane
Sleep mode auto control
Independent dehumidification
Air flow Direction control
Auto mode
Temp. Compensation
Flexible wiring connection
Auto defrost
Plasma (Optional)
Anti-cold function
Self-diag. function
Auto-restart function
Work voltage (160V-253V)
Ionizer (Optional)
Prevent the cold wind at the
beginning of unit start.