Carrier 42NQ012N - Operation Description; Remote Control Functions and Operation

7-1. Remote control
7-1-1. Remote control and its functions
FILE NO. SVM-10031
− 11 −
7-1-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press MODE : Select A.
2. Press MODE : Set the desired temperature.
2. COOLING / HEATING / FAN ONLY OPERATION
1. Press MODE : Select Cool , Heat , or Fan only .
2. Press MODE : Set the desired temperature.
Cooling: Min. 17°C, Heating : Max, 30°C, Fan Only: No temperature indication
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
ON OFF
13
2
6
7
8
10
18
16
5
4
3
14
15
12
9
11
17
1
PRESET
FAN
MODE
HI-POWER
ECOFIXSWING
CLR
SET
SLEEP
CHECK FILTER CLECK
Infrared signal emitter
ON
OFF
1
Start/Stop button ( )
2
Mode select button ( )
3
Temperature button ( )
4
Fan speed button ( )
5
Swing louver button ( )
6
Set louver button ( )
7
On timer button ( )
8
Off timer button ( )
9
Sleep timer button ( )
10
Setup button ( )
11
Clear button ( )
12
Memory and Preset button ( )
13
High power button ( )
14
Economy button ( )
15
Filter reset button ( )
16
Clock reset button ( )
17
Check button ( )
18
3. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press MODE : Select Dry .
2. Press MODE : Set the desired temperature.
4. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
Press HI-POWER : Start and stop the operation.
operation (except in DRY and FAN ONLY mode)
7. OPERATION DESCRIPTION