Need help?Do you have a question about the Carrier 42QHF025 and is the answer not in the manual?
General| Model | 42QHF025 |
|---|---|
| Brand | Carrier |
| Compatibility | Carrier Air Conditioners |
| Battery Type | AAA |
| Number of Batteries | 2 |
| Type | Remote Control |
Install batteries into the remote control unit.
Aim the remote control towards the air conditioner.
Turn the unit on or off using the power button.
Choose the operating mode: Auto, Cool, Dry, Heat, or Fan.
Set the desired temperature between 17°C and 30°C.
Choose the fan speed: Low, Medium, or High.
Shows the selected operating mode (Auto, Cool, Dry, Heat).
Lights up when the remote sends signals to the indoor unit.
Displays temperature setting (17-30°C) or timer setting (0-24h).
Indicates when the unit is operating.
Shows selected fan speed (Auto, High, Med, Low).
Indicates when the remote sensing function is active.
Shows status of Timer ON or Timer OFF settings.
Increases the temperature setting.
Decreases the temperature setting.
Cycles through operation modes (Auto, Cool, Dry, Heat, Fan).
Starts or stops the air conditioner operation.
Controls the louver's swing direction.
Activates/disables self-clean and ionizer functions.
Controls Follow Me and Smart Eye features.
Selects the fan speed (Auto, Low, Med, High).
Initiates and sets the auto-on timer sequence.
Initiates and sets the auto-off timer sequence.
Activates or deactivates the sleep function.
Activates/disables Turbo and Silence functions.
Controls display light and freeze protection function.
Unit automatically selects mode based on temperature.
Select and operate in Cool, Heat, or Fan mode.
Operates the unit in dehumidification mode.
Set the unit to turn on or off automatically.
To Next Page