Carrier 42QTD012DS - Remove Display PCB; Remove Vertical Swing Motor

7
4 Remove the
display
PCB
1) R
elease the 2 screws
(both sides) and push the
panel upwards to remove
it
2) Release 11 screws (5 at
the front and 6 at both
sides).
3) Remove the front panel.
The display board is on
the back.
4) Release 2 screws fixing
the display PCB
5) Unplug the wires
5** Remove the
vertical
swing
motor
1) R
emove the drain pan
assembly
Release the 2 screws
Release the screw
Push it upwards