Carrier 42UQV050M - Remote Controller Operation; Automatic and Cooling;Heating;Fan Operations

9-4. Remote controller and its function
9-4-1. Parts name of remote controller
FILE NO. SVM-13035
Infrared signal emitter
Start/Stop button
Mode select button ( )
Temperature button ( )
Fan speed button ( )
Swing louver button ( )
Set louver button ( )
On timer button ( )
Off timer button ( )
ECO Sleep button ( )
Setup button ( )
Clear button ( )
Memory and Preset button ( )
High power button ( )
Economy button ( )
Quiet button ( )
Filter reset button ( )
Set clock button ( )
Check button ( )
Reset button ( )
4
5
10
11
14
16
8
1
2
13
17
20
15
3
19
7
6
18
9
12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
9-4-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling or fan only operation.
1. Press : Select A.
2. Press : Set the desired temperature.
2. COOLING / HEATING / FAN ONLY OPERATION
1. Press : Select Cool Heat or Fan only .
2. Press : Set the desired temperature.
Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
Note:
• The provided Remote Controller is a wireless type, which also can be used as a wire.
Please see “How to Connect The Remote Controller for Wired Operation", located in installation instruction,
in case of wired control is required.
• In wire operation, remote controller will return to initial condition (PRESET, TIMER and CLOCK will return
to initial condition) when user shutdown power supply of Air conditioner.
– 42 –