Carrier 45MBDAQ - Page 11

45MBDAQ: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
11
ECO/GEAR FUNCTION
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 75 F/ 24 C, fan speed of Auto to save energy (only when the set temperature
is less than 75 F/ 24 C). If the set temperature is above 75 F/ 24 C, press the ECO button,
the fan speed will change to AUTO, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 75 F/ 24 C will stop ECO operation.
Under ECO operation, the set tmeperature should be 75 F/ 24 C or above, it may result in
insufficient cooling. If you feel uncomfortable, just press ECO again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO....
Note:This function is only available under COOL mode.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75% (up to 75% electrical energy consumption)
50%(up to 50% electrical energy consumption)
Previous setting mode.