When you select Boost feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select Boost feature in HEAT mode, the unit will blow heat air
with strongest wind setting to jump-start the heating process.
For units with Electric heat elements, the Electric HEATER will activate
and jump-start the heating process.
CLEAN function
Press Clean button to active clean function.
Clean
Active clean function:
The Active Clean Technology washes away dust, mold, and grease that may
cause odors when it adheres to the heat exchanger by automatically freezing and
then rapidly thawing the frost. When this function is turned on, the indoor unit display
window appears “CL”, after 20 to 45 minutes, the unit will turn off automatically and
cancel CLEAN function.
Boost
NOTE
:
5s
If the Fireplace feature is stopped, “ ” OF
displays for 3 seconds on the screen.
If the Fireplace feature is activated, “ ”
On
displays for 3 seconds on the screen.
Keep pressing Boost button more than 5 seconds in Heating/
Auto heating mode to active Fireplace Operation. To stop this
feature, keep pressing this button more than 3 seconds.
Fireplace Operation
Boost
To Next Page
Loading...
